Da

✏️ Editing: view.s1.base.php

<?php
defined('ABSPATH') || defined('DUPXABSPATH') || exit;
/** IDE HELPERS */
/* @var $GLOBALS['DUPX_AC'] DUPX_ArchiveConfig */
/* @var $archive_config DUPX_ArchiveConfig */
/* @var $installer_state DUPX_InstallerState */

require_once($GLOBALS['DUPX_INIT'].'/classes/config/class.archive.config.php');
require_once($GLOBALS['DUPX_INIT'].'/ctrls/classes/class.ctrl.extraction.php');

$is_wpconfarc_present = file_exists(DUPX_Package::getWpconfigArkPath());
//ARCHIVE FILE
if ( file_exists($GLOBALS['FW_PACKAGE_PATH']) ) {
    $arcCheck = 'Pass';
} else {
    if ($is_wpconfarc_present) {
        $arcCheck = 'Warn';
    } else {
        $arcCheck = 'Fail';
    }
}
$arcSize = file_exists($GLOBALS['FW_PACKAGE_PATH']) ? @filesize($GLOBALS['FW_PACKAGE_PATH']) : 0;
$arcSize = is_numeric($arcSize) ? $arcSize : 0;

$installer_state   = DUPX_InstallerState::getInstance();
$mh_manager        = DUPX_Custom_Host_Manager::getInstance();
$is_overwrite_mode = ($installer_state->mode === DUPX_InstallerMode::OverwriteInstall);
$is_wordpress      = DUPX_Server::isWordPress();
$is_dbonly         = $GLOBALS['DUPX_AC']->exportOnlyDB;
$managed_host      = $mh_manager->isManaged();

//REQUIRMENTS
$req       = array();
$req['05'] = $arcCheck;
$req['10'] = DUPX_Server::is_dir_writable($GLOBALS['DUPX_ROOT']) ? 'Pass' : 'Fail';
$req['20'] = function_exists('mysqli_connect') ? 'Pass' : 'Fail';
$req['30'] = DUPX_Server::$php_version_safe ? 'Pass' : 'Fail';
$req['40'] = $managed_host === false ? 'Pass' : 'Fail';
$all_req   = in_array('Fail', $req) ? 'Fail' : 'Pass';

//NOTICES
$openbase            = ini_get("open_basedir");
$datetime1           = $GLOBALS['DUPX_AC']->created;
$datetime2           = date("Y-m-d H:i:s");
$fulldays            = round(abs(strtotime($datetime1) - strtotime($datetime2)) / 86400);
$root_path           = DupLiteSnapLibIOU::safePath($GLOBALS['DUPX_ROOT'], true);
$wpconf_path         = "{$root_path}/wp-config.php";
$max_time_zero       = ($GLOBALS['DUPX_ENFORCE_PHP_INI']) ? false : @set_time_limit(0);
$max_time_size       = 314572800;  //300MB
$max_time_ini        = ini_get('max_execution_time');
$max_time_warn       = (is_numeric($max_time_ini) && $max_time_ini < 31 && $max_time_ini > 0) && $arcSize > $max_time_size;
$parentWordFencePath = DUPX_Server::parentWordfencePath();

$notice       = array();
$notice['10'] = !$is_overwrite_mode ? 'Good' : 'Warn';
$notice['20'] = !$is_wpconfarc_present ? 'Good' : 'Warn';
if ($is_dbonly) {
    $notice['25'] = $is_wordpress ? 'Good' : 'Warn';
}
$notice['30'] = $fulldays <= 180 ? 'Good' : 'Warn';

$packagePHP      = $GLOBALS['DUPX_AC']->version_php;
$currentPHP      = DUPX_Server::$php_version;
$packagePHPMajor = intval($packagePHP);
$currentPHPMajor = intval($currentPHP);
$notice['45']    = ($packagePHPMajor === $currentPHPMajor || $GLOBALS['DUPX_AC']->exportOnlyDB) ? 'Good' : 'Warn';

$notice['50'] = empty($openbase) ? 'Good' : 'Warn';
$notice['60'] = !$max_time_warn ? 'Good' : 'Warn';
$notice['70'] = $GLOBALS['DUPX_AC']->mu_mode == 0 ? 'Good' : 'Warn';
$notice['80'] = !$GLOBALS['DUPX_AC']->is_outer_root_wp_config_file ? 'Good' : 'Warn';
if ($GLOBALS['DUPX_AC']->exportOnlyDB) {
    $notice['90'] = 'Good';
} else {
    $notice['90'] = (!$GLOBALS['DUPX_AC']->is_outer_root_wp_content_dir) ? 'Good' : 'Warn';
}

$space_free    = @disk_free_space($GLOBALS['DUPX_ROOT']);
$archive_size  = file_exists($GLOBALS['FW_PACKAGE_PATH']) ? filesize($GLOBALS['FW_PACKAGE_PATH']) : 0;
$notice['100'] = ($space_free && $archive_size > $space_free) ? 'Warn' : 'Good';
$notice['110'] = $parentWordFencePath === false ? 'Good' : 'Warn';

$all_notice = in_array('Warn', $notice) ? 'Warn' : 'Good';

//SUMMATION
$req_success = ($all_req == 'Pass');
$req_notice  = ($all_notice == 'Good');
$all_success = ($req_success && $req_notice);
$agree_msg   = "To enable this button the checkbox above under the 'Terms & Notices' must be checked.";

$shell_exec_unzip_path  = DUPX_Server::get_unzip_filepath();
$shell_exec_zip_enabled = ($shell_exec_unzip_path != null);
$zip_archive_enabled    = class_exists('ZipArchive') ? 'Enabled' : 'Not Enabled';
$archive_config         = DUPX_ArchiveConfig::getInstance();
?>

<div class="hdr-main">
    Step <span class="step">1</span> of 4: Deployment
    <div class="sub-header">This step will extract the archive file contents.</div>
</div>

<div class="hdr-sub1 toggle-hdr" data-type="toggle" data-target="#s1-area-setup-type" style="display:none">
    <a id="s1-area-setup-type-link"><i class="fa fa-plus-square"></i>Overview</a>
</div>
<div id="s1-area-setup-type" style="display:none">

<input type="radio" id="setup-type-fresh" name="setup_type" value="1" checked="true" onclick="DUPX.toggleSetupType()" />
    <label for="setup-type-fresh"><b>Standard Install</b></label>
    <i class="fas fa-question-circle fa-sm"
       data-tooltip-title="Standard Install"
       data-tooltip="A standard install is the default way Duplicator has always worked.  Setup your package in an empty directory and run the installer."></i>
    <br/>
    <div class="s1-setup-type-sub" id="s1-setup-type-sub-1">
        <input type="checkbox" name="setup-backup-files" id="setup-backup-files-fresh" />
        <label for="setup-backup-files-fresh">Backup Existing Files</label><br/>
        <input type="checkbox" name="setup-remove-files" id="setup-remove-files-fresh" />
        <label for="setup-remove-files-fresh">Remove Existing Files</label><br/>
    </div><br/>

<input type="radio" id="setup-type-overwrite" name="setup_type" value="2" onclick="DUPX.toggleSetupType()" />
    <label for="setup-type-overwrite"><b>Overwrite Install</b></label>
    <i class="fas fa-question-circle fa-sm"
       data-tooltip-title="Overwrite Install"
       data-tooltip="An Overwrite Install allows Duplicator to overwrite an existing WordPress Site."></i><br/>
    <div class="s1-setup-type-sub" id="s1-setup-type-sub-2">
        <input type="checkbox" name="setup-backup-files" id="setup-backup-files-overwrite" />
        <label for="setup-backup-files-overwrite">Backup Existing Files</label><br/>
        <input type="checkbox" name="setup-remove-files" id="setup-remove-files-overwrite" />
        <label for="setup-remove-files-overwrite">Remove Existing Files</label><br/>
        <input type="checkbox" name="setup-backup-database" id="setup-backup-database-overwrite" />
        <label for="setup-backup-database-overwrite">Backup Existing Database</label> <br/>
    </div><br/>

<input type="radio" id="setup-type-db" name="setup_type" value="3" onclick="DUPX.toggleSetupType()" />
    <label for="setup-type-db"><b>Database Only Install</b></label>
    <i class="fas fa-question-circle fa-sm"
       data-tooltip-title="Database Only"
       data-tooltip="A database only install allows Duplicator to connect to a database and install only the database."></i><br/>
    <div class="s1-setup-type-sub" id="s1-setup-type-sub-3">
        <input type="checkbox" name="setup-backup-database" id="setup-backup-database-db" />
        <label for="setup-backup-database-db">Backup Existing Database</label> <br/>
    </div><br/>
</div>

<div class="hdr-sub1 toggle-hdr" data-type="toggle auto" data-target="#s1-area-archive-file">
    <a id="s1-area-archive-file-link"><i class="fa fa-plus-square"></i>Overview</a>
</div>
<div id="s1-area-archive-file" style="display:none" class="hdr-sub1-area">
    <div id="tabs">
        <ul>
            <li><a href="#tabs-1">Package Details</a></li>
        </ul>
        <div id="tabs-1">

<table class="s1-archive-local">
                <tr>
                    <td colspan="2"><div class="hdr-sub3">Site Details</div></td>
                </tr>
                <tr>
                    <td>Site:</td>
                    <td><?php echo DUPX_U::esc_html($GLOBALS['DUPX_AC']->blogname); ?> </td>
                </tr>
                <tr>
                    <td>Url:</td>
                    <td><?php echo DUPX_U::esc_html($GLOBALS['DUPX_AC']->url_old); ?> </td>
                </tr>
                <tr>
                    <td>Notes:</td>
                    <td><?php echo strlen($GLOBALS['DUPX_AC']->package_notes) ? DUPX_U::esc_html($GLOBALS['DUPX_AC']->package_notes) : " - no notes - "; ?></td>
                </tr>
                <?php if ($GLOBALS['DUPX_AC']->exportOnlyDB) : ?>
                    <tr>
                        <td>Mode:</td>
                        <td>Archive only database was enabled during package package creation.</td>
                    </tr>
                <?php endif; ?>
            </table>

<table class="s1-archive-local">
                <tr>
                    <td colspan="2"><div class="hdr-sub3">Archive Details</div></td>
                </tr>
                <tr>
                    <td style="vertical-align:top">Status:</td>
                    <td>
                        <?php if ($req['05'] == 'Fail' || $req['05'] == 'Warn') : ?>
                            <span class="dupx-fail" style="font-style:italic">
                                    Archive validation issue detected. <br/>
                                    <small>Please see validation section below for full details.</small>
                            </span>
                        <?php else : ?>
                            <span class="dupx-pass">Archive file successfully detected.</span>
                        <?php endif; ?>
                    </td>
                </tr>
                <tr>
                    <td>Path:</td>
                    <td><?php echo DUPX_U::esc_html($root_path); ?> </td>
                </tr>
                <tr>
                    <td>Size:</td>
                    <td><?php echo DUPX_U::readableByteSize($arcSize); ?> </td>
                </tr>
            </table>
        </div>
        
    </div>
</div><br/>

<div class="hdr-sub1 toggle-hdr" data-type="toggle" data-target="#s1-area-adv-opts">
    <a href="javascript:void(0)"><i class="fa fa-plus-square"></i>Options</a>
</div>
<div id="s1-area-adv-opts" class="hdr-sub1-area" style="display:none">
    <div class="help-target">
        <?php DUPX_View_Funcs::helpIconLink('step1'); ?>
    </div>

<div id="tabs-opts">
        <ul>
            <li><a href="#tabs-opts-1">General</a></li>
            <li><a href="#tabs-opts-2">Advanced</a></li>
        </ul>
        <div id="tabs-opts-1">

<div class="hdr-sub3">Extraction Settings</div>
            <table class="dupx-opts dupx-advopts">
                <tr>
                    <td>Extraction:</td>
                    <td>
                        <?php
                        $options    = array();
                        $extra_attr = ($arcCheck == 'Warn' && $is_wpconfarc_present) ? ' selected="selected"' : '';
                        $options[]  = '<option '.($is_wpconfarc_present ? '' : 'disabled').$extra_attr.' value="manual">Manual Archive Extraction '.($is_wpconfarc_present ? '' : '*').'</option>';
                        if ($archive_config->isZipArchive()) {
                            //ZIP-ARCHIVE
                            $extra_attr = ('Pass' == $arcCheck && $zip_archive_enabled && !$shell_exec_zip_enabled) ? ' selected="selected"' : '';
                            $extra_attr .= ('Pass' != $arcCheck || !$zip_archive_enabled) ? ' disabled="disabled"' : '';
                            $options[]  = '<option value="ziparchive"'.$extra_attr.'>PHP ZipArchive</option>';

//SHELL-EXEC UNZIP
                            $extra_attr = ('Pass' != $arcCheck || !$shell_exec_zip_enabled) ? ' disabled="disabled"' : '';
                            $extra_attr .= ('Pass' == $arcCheck && $shell_exec_zip_enabled) ? ' selected="selected"' : '';
                            $options[]  = '<option value="shellexec_unzip"'.$extra_attr.'>Shell Exec Unzip</option>';
                        } else { // DUPARCHIVE
                            $extra_attr = ('Pass' == $arcCheck) ? ' selected="selected"' : 'disabled="disabled"';
                            $options[]  = '<option value="duparchive"'.$extra_attr.'>DupArchive</option>';
                        }
                        $num_selections = count($options);
                        ?>
                        <select id="archive_engine" name="archive_engine" size="<?php echo DUPX_U::esc_attr($num_selections); ?>">
                            <?php echo implode('', $options); ?>
                        </select><br/>
                        <?php if (!$is_wpconfarc_present): ?>
                            <span class="sub-notes">
                                *Option enabled when archive has been pre-extracted
                                <a href="https://snapcreek.com/duplicator/docs/faqs-tech/#faq-installer-015-q" target="_blank">[more info]</a>
                            </span>
                        <?php endif; ?>
                    </td>
                </tr>
                <tr>
                    <td style="vertical-align: top;padding-top: 10px;">Archive Action:</td>
                    <td id="archive_action_wrapper">
                        <select id="archive_action_input" name="<?php echo DUP_LITE_Extraction::INPUT_NAME_ARCHIVE_ACTION; ?>" class="input-item">
                            <option value="<?php echo DUP_LITE_Extraction::ACTION_DO_NOTHING; ?>" selected="selected">
                                Extract files over current files
                            </option>
                            <option value="<?php echo DUP_LITE_Extraction::ACTION_REMOVE_WP_FILES; ?>">
                                Remove WP core and content and extract
                            </option>
                            <option value="<?php echo DUP_LITE_Extraction::ACTION_REMOVE_ALL_FILES; ?>">
                                Remove all files and extract
                            </option>
                        </select>
                        <div class="sub-note" style="margin-top:5px; max-width:98%; font-size:10px">
                            <div class="archive-action-note archive-action-<?php echo DUP_LITE_Extraction::ACTION_DO_NOTHING; ?>">
                                Note: <b>Files are extracted over existing files.</b> After install, the destination folder will contain a combination of the old
                                site files and the files extracted from the archive.  This option is the most conservative option for those who want to make sure
                                they do not want to lose data.
                            </div>
                            <div class="archive-action-note archive-action-<?php echo DUP_LITE_Extraction::ACTION_REMOVE_ALL_FILES; ?> no-display">
                                Note: Before extracting the package files, <b>all files and folders in the installation folder will be removed</b> except for folders
                                that contain WordPress installations or Duplicator backup folders. This option is recommended for those who want to delete all files
                                related to old installations or external applications.
                            </div>
                            <div class="archive-action-note archive-action-<?php echo DUP_LITE_Extraction::ACTION_REMOVE_WP_FILES; ?> no-display">
                                Note: Before extracting the package files, <b>all current WordPress core and content files and folders will be removed</b> 
                                (wp-include, wp-content ... ) This option is for those who want to avoid having old site media mixed with new but have other
                                files/folders in the home path that they don't want to delete.
                            </div>
                        </div>
                    </td>
                </tr>
            </table><br/><br/>

</div>
        
        <div id="tabs-opts-2">

<div class="hdr-sub3">File Settings</div>
            <table class="dupx-opts dupx-advopts">
                <tr>
                    <td valign="top">Config Files:</td>
                    <td>
                        <select name="config_mode" id="config_mode" onchange="DUPX.toggleConfigMode(this)">
                            <option value="NEW" data-title="Details: Ceates new config files streamlined to ensure no conflicts are created.">Create New (recommended)</option>
                            <optgroup label="Advanced">
                                <option value="RESTORE" data-title="Details: Retains old config files from the server where the package was created.">Restore Original from Archive.zip/daf</option>
                                <option value="IGNORE" data-title="Details: This option does not create or import any config files.">Ignore All</option>
                            </optgroup>
                        </select> <br/>
                        <span class="config-files-helper">
                            This option creates new streamlined config files to help ensure no conflicts are created.  It also controls how
                            the htaccess, user.ini and web.config are applied in step 3 of this installer.
                            <?php DUPX_View_Funcs::helpLink('step1', '[more info]'); ?>
                        </span>

</td>
                </tr>
                <tr>
                    <td>Permissions:</td>
                    <td>
                        <input type="checkbox" name="set_file_perms" id="set_file_perms" value="1" onclick="jQuery('#file_perms_value').prop('disabled', !jQuery(this).is(':checked'));"/>
                        <label for="set_file_perms">All Files</label><input name="file_perms_value" id="file_perms_value" style="width:45px; margin-left:7px;" value="644" disabled> &nbsp;
                        <input type="checkbox" name="set_dir_perms" id="set_dir_perms" value="1" onclick="jQuery('#dir_perms_value').prop('disabled', !jQuery(this).is(':checked'));"/>
                        <label for="set_dir_perms">All Directories</label><input name="dir_perms_value" id="dir_perms_value" style="width:45px; margin-left:7px;" value="755" disabled>
                    </td>
                </tr>
                <tr>
                    <td>File Times:</td>
                    <td>
                        <input type="radio" name="zip_filetime" id="zip_filetime_now" value="current" checked="checked" />
                        <label class="radio" for="zip_filetime_now" title='Set the files current date time to now'>Current</label> &nbsp;
                        <input type="radio" name="zip_filetime" id="zip_filetime_orginal" value="original" />
                        <label class="radio" for="zip_filetime_orginal" title="Keep the files date time the same">Original</label>
                    </td>
                </tr>
            </table><br/>

<div class="hdr-sub3">Utilities</div>
            <table class="dupx-opts dupx-advopts">
                <tr>
                    <td>Safe Mode:</td>
                    <td>
                        <select name="exe_safe_mode" id="exe_safe_mode" onchange="DUPX.onSafeModeSwitch();">
                            <option value="0">Off</option>
                            <option value="1">Basic</option>
                            <option value="2">Advanced</option>
                        </select>
                    </td>
                </tr>
                <?php if (!$archive_config->isZipArchive()): ?>
                    <tr>
                        <td>Client-Kickoff:</td>
                        <td>
                            <input type="checkbox" name="clientside_kickoff" id="clientside_kickoff" value="1" checked/>
                            <label for="clientside_kickoff" style="font-weight: normal">Browser drives the archive engine.</label>
                        </td>
                    </tr>
                <?php endif; ?>
                <tr>
                    <td>Testing:</td>
                    <td>
                        <a href="javascript:void(0)" target="db-test" onclick="DUPX.openDBValidationWindow(); return false;">[Perform Quick Database Connection Test]</a>
                    </td>
                </tr>
                <tr>
                    <td>Logging:</td>
                    <td>
                        <input type="radio" name="logging" id="logging-light" value="<?php echo DUPX_Log::LV_DEFAULT; ?>" checked="true"> <label for="logging-light" class="radio">Light</label> &nbsp;
                        <input type="radio" name="logging" id="logging-detailed" value="<?php echo DUPX_Log::LV_DETAILED; ?>"> <label for="logging-detailed" class="radio">Detailed</label> &nbsp;
                        <input type="radio" name="logging" id="logging-debug" value="<?php echo DUPX_Log::LV_DEBUG; ?>"> <label for="logging-debug" class="radio">Debug</label> &nbsp;
                        <input type="radio" name="logging" id="logging-h-debug" value="<?php echo DUPX_Log::LV_HARD_DEBUG; ?>"> <label for="logging-h-debug" class="radio">Verbose Debug</label>
                    </td>
                </tr>
            </table>
        </div>
    </div>
</div><br/>

<div class="hdr-sub1 toggle-hdr s1-hdr-sys-setup-hdr" data-type="toggle" data-target="#s1-area-sys-setup">
    <a id="s1-area-sys-setup-link"><i class="fa fa-plus-square"></i>Validation</a>
    <div class="<?php echo ( $req_success) ? 'status-badge-pass' : 'status-badge-fail'; ?>	">
        <?php echo ( $req_success) ? 'Pass' : 'Fail'; ?>
    </div>
</div>
<div id="s1-area-sys-setup" style="display:none" class="hdr-sub1-area">
    <div class='info-top'>The system validation checks help to make sure the system is ready for install.</div>

<div class="s1-reqs" id="s1-reqs-all">
        <div class="header">
            <table class="s1-checks-area">
                <tr>
                    <td class="title">Requirements <small>(must pass)</small></td>
                    <td class="toggle"><a href="javascript:void(0)" onclick="DUPX.toggleAllReqs('#s1-reqs-all')">[toggle]</a></td>
                </tr>
            </table>
        </div>

<?php
        $status = strtolower($req['05']);
        ?>
        <div class="status <?php echo DUPX_U::esc_attr($status); ?>"><?php echo DUPX_U::esc_html($req['05']); ?></div>
        <div class="title" data-status="<?php echo DUPX_U::esc_attr($status); ?>" data-type="toggle auto" data-target="#s1-reqs05">
            <i class="fa fa-caret-right"></i> Archive Check
        </div>
        <div class="info" id="s1-reqs05">
            <table class="s1-archive-local">
                <tr>
                    <td colspan="2"><div class="hdr-sub3">Archive Details</div></td>
                </tr>
                <tr>
                    <td style="vertical-align:top">Status:</td>
                    <td>
                        <span class="dupx-fail">
                        <?php if ($arcCheck == 'Fail' || $arcCheck == 'Warn') : ?>
                            An archive/installer mismatch has been detected.  Each archive file has a unique installer file associated with it for security reasons.
                            Be sure to download the installer.php and archive.zip/daf files from the same package line in the Duplicator Packages screen
                            located in the WordPress admin.  The correct installer can also be found inside of the archive.zip/daf file named "installer-backup.php".
                            <br/><br/>
                            <?php if ($arcCheck == 'Warn') : ?>
                                Users can still proceed with the install by choosing Manual Archive Extraction to ignore this message, but must manually
                                extract the archive themselves.
                            <?php else : ?>
                                If the contents of the archive were manually transferred to this location without the archive.zip/daf file (e.g. FTP).  Then
                                simply create a temp archive.zip/daf file named with the correct archive name.  To get the original archive name go to WordPress
                                Admin ❯ Duplicator ❯ Package Line ❯ Details ❯ Archive Name and place the file in the same directory as the installer.php file.
                                The temp file will not need to contain any data.   Afterward, refresh this page and continue with the install process.
                            <?php endif; ?>
                        </span>
                        <?php else : ?>
                            <span class="dupx-pass">Archive file successfully detected.</span>
                        <?php endif; ?>
                    </td>
                </tr>
                <tr>
                    <td>Path:</td>
                    <td><?php echo DUPX_U::esc_html($root_path); ?> </td>
                </tr>
                <tr>
                    <td>Size:</td>
                    <td><?php echo DUPX_U::readableByteSize($arcSize); ?> </td>
                </tr>
            </table>
        </div>

<?php
        $status = strtolower($req['10']);
        ?>
        <div class="status <?php echo DUPX_U::esc_attr($status); ?>"><?php echo DUPX_U::esc_html($req['10']); ?></div>
        <div class="title" data-status="<?php echo DUPX_U::esc_attr($status); ?>" data-type="toggle auto" data-target="#s1-reqs10">
            <i class="fa fa-caret-right"></i> Permissions
        </div>
        <div class="info" id="s1-reqs10">
            <table>
                <tr>
                    <td><b>Deployment Path:</b> </td>
                    <td><i><?php echo "{$GLOBALS['DUPX_ROOT']}"; ?></i> </td>
                </tr>
                <tr>
                    <td><b>Suhosin Extension:</b> </td>
                    <td><?php echo extension_loaded('suhosin') ? "<i class='dupx-fail'>Enabled</i>" : "<i class='dupx-pass'>Disabled</i>"; ?> </td>
                </tr>
                <tr>
                    <td><b>PHP Safe Mode:</b> </td>
                    <td><?php echo (DUPX_Server::$php_safe_mode_on) ? "<i class='dupx-fail'>Enabled</i>" : "<i class='dupx-pass'>Disabled</i>"; ?> </td>
                </tr>
            </table><br/>

The deployment path must be writable by PHP in order to extract the archive file.  Incorrect permissions and extension such as
            <a href="https://suhosin.org/stories/index.html" target="_blank">suhosin</a> can sometimes interfere with PHP being able to write/extract files.
            Please see the <a href="https://snapcreek.com/duplicator/docs/faqs-tech/#faq-trouble-055-q" target="_blank">FAQ permission</a> help link for complete details.
            PHP with <a href='http://php.net/manual/en/features.safe-mode.php' target='_blank'>safe mode</a> should be disabled.  If Safe Mode is enabled then
            please contact your hosting provider or server administrator to disable PHP safe mode.
        </div>

<div class="status <?php echo strtolower($req['20']); ?>"><?php echo DUPX_U::esc_html($req['20']); ?></div>
        <div class="title" data-status="<?php echo strtolower($req['20']); ?>" data-type="toggle auto" data-target="#s1-reqs20"><i class="fa fa-caret-right"></i> PHP Mysqli</div>
        <div class="info" id="s1-reqs20">
            Support for the PHP <a href='http://us2.php.net/manual/en/mysqli.installation.php' target='_blank'>mysqli extension</a> is required.
            Please contact your hosting provider or server administrator to enable the mysqli extension.  <i>The detection for this call uses
                the function_exists('mysqli_connect') call.</i>
        </div>

<div class="status <?php echo strtolower($req['30']); ?>"><?php echo DUPX_U::esc_html($req['30']); ?></div>
        <div class="title" data-status="<?php echo strtolower($req['30']); ?>" data-type="toggle auto" data-target="#s1-reqs30"><i class="fa fa-caret-right"></i> PHP Version</div>
        <div class="info" id="s1-reqs30">
            This server is running: <b>PHP <?php echo DUPX_Server::$php_version ?></b>. <i>A minimum of PHP 5.3.8+ is required. PHP 7.0+ is recommended.</i>
            <br/><br/>

If this requirement fails contact your host or server administrator and let them know you would like to upgrade your PHP version.
            For more information on this topic see the FAQ titled <a href="https://snapcreek.com/duplicator/docs/faqs-tech/#faq-licensing-017-q" target="_blank">What version of PHP Does Duplicator Support?</a>
        </div>

<div class="status <?php echo strtolower($req['40']); ?>"><?php echo DUPX_U::esc_html($req['40']); ?></div>
        <div class="title" data-status="<?php echo strtolower($req['40']); ?>" data-type="toggle auto" data-target="#s1-reqs40">
            <i class="fa fa-caret-right"></i> Managed Hosts
        </div>
        <div class="info" id="s1-reqs40">
            <p>
            <?php if ($managed_host !== false): ?>
                The installer has detected that this server is possibly in a managed hosting setup. The followings checks
                have been made which will not allow the installer to continue.
            <?php else: ?>
                Current host is not managed.
            <?php endif; ?>
            </p>
            <ul>
                <li>
                    <b>Managed system: </b> <?php echo is_string($managed_host)
                        ? '<span class="maroon">It appears the installer is being executed on "' . $mh_manager->getHosting($managed_host)->getLabel() . '".  Managed hosting is not presently supported in Duplicator Lite.</span>'
                        : "<span class='green'>No restrictions have been found for this host.</span>" ?>
                </li>
                <li>
                    <b>Configuration file: </b><?php echo $mh_manager->wpConfigIsNotWriteable()
                        ? "<span class='maroon'>The WordPress configuration file (wp-config.php) must be accessible and writeable to the installer</span>"
                        : "<span class='green'>The wp-config.php is accessible to the installer.</span>" ?>
                </li>
                <li>
                    <b>Core Directories: </b><?php echo $mh_manager->notAccessibleCoreDirPresent() > 0
                        ? "<span class='maroon'>The WordPress core directories wp-admin, wp-content and wp-includes must be accessible and writeable to the installer</span>"
                        : "<span class='green'>The WordPress core directories are accessible to the installer</span>"; ?>
                </li>
            </ul>
        </div>
    </div><br/>

<div class="s1-reqs" id="s1-notice-all">
        <div class="header">
            <table class="s1-checks-area">
                <tr>
                    <td class="title">Notices <small>(optional)</small></td>
                    <td class="toggle"><a href="javascript:void(0)" onclick="DUPX.toggleAllNotices('#s1-notice-all')">[toggle]</a></td>
                </tr>
            </table>
        </div>

<?php if ($is_overwrite_mode && $is_wordpress) : ?>
            <div class="status fail">Warn</div>
            <div class="title" data-status="warn" data-type="toggle auto" data-target="#s1-notice10"><i class="fa fa-caret-right"></i> Overwrite Install</div>
            <div class="info" id="s1-notice10">
                <?php if ($GLOBALS['DUPX_AC']->installSiteOverwriteOn || $is_dbonly) { ?>
                    <div class="gray-panel warn-text gray-panel-overwrite">
                        <i class="fas fa-exclamation-triangle fa-lg"></i> WARNING: The Duplicator installer file is currently placed in a location that has an existing WordPress site!
                        Continuing with this install process will <u>overwrite</u> all existing files and the database associated with this WordPress site.  Only continue
                        with this process if this site is no longer needed.<br/>
                    </div>
                <?php } ?>
                <p style="font-size:14px">
                    <b><i class="fas fa-folder-open"></i> Deployment Path:</b> <i><?php echo "{$GLOBALS['DUPX_ROOT']}"; ?></i>
                </p>
                <?php if ($GLOBALS['DUPX_AC']->installSiteOverwriteOn || $is_dbonly) { ?>
                    <p>
                        Duplicator is in "Overwrite Install " mode because it has detected an existing WordPress site at the deployment path above.  This mode allows for the installer
                        to be dropped directly into an existing WordPress site and overwrite its contents.   Any content inside of the archive file
                        will <u>overwrite</u> the existing contents in the deployment path above.  To continue choose one of these options:
                    </p>

<ol>
                        <li>Ignore this notice and continue with the install to overwrite this WordPress site.</li>
                        <li>Move the installer and archive to an <u>empty directory</u>.  Then install from there to keep this site intact.</li>
                    </ol>

<p style="color:maroon">
                        <b>Notice:</b> Existing content such as plugin/themes/images will still show-up after the install is complete if they did not already exist in
                        the archive file. For example, if plugin X is in the current site but that same plugin X <u>does not exist</u> in the archive file
                        then that plugin will display as a disabled plugin after the install is completed. The same concept with themes, images and files apply.
                        This will not impact the site's operation, and the behavior is expected since the install process only extracts the archive files to the deployment
                        path.
                    </p>

<p>
                        <b>Recommendation:</b> It is recommended you only overwrite WordPress sites that have no value, such as a temporary staging site. On step 2
                        of this installer you will be given the option to change the database if needed.  However, by default the current sites database will be
                        replaced with the one in this Duplicator package.
                    </p>
                    <?php
                } else {
                    ?>
                    <p>
                        Duplicator works best by placing the installer and archive files into an empty directory.  If a wp-config.php file is found in the extraction
                        directory it might indicate that a pre-existing WordPress site exists which can lead to a bad install.
                    </p>
                    <b>Options:</b>
                    <ul style="margin-bottom: 0">
                        <li>If the archive was already manually extracted then <a href="javascript:void(0)" onclick="DUPX.getManaualArchiveOpt()">[Enable Manual Archive Extraction]</a></li>
                        <li>Empty the directory of all files, except for the installer.php and archive.zip/daf files.</li>
                        <li>Advanced Users: Can attempt to manually remove the wp-config file only if the archive was manually extracted.</li>
                    </ul>
                    <?php
                }
                ?>
            </div>

<?php elseif ($is_wpconfarc_present && file_exists("{$root_path}/dup-installer")) : ?>
            <div class="status fail">Warn</div>
            <div class="title" data-type="toggle" data-target="#s1-notice20"><i class="fa fa-caret-right"></i> Archive Extracted</div>
            <div class="info" id="s1-notice20">
                <b>Deployment Path:</b> <i><?php echo "{$GLOBALS['DUPX_ROOT']}"; ?></i>
                <br/><br/>

The installer has detected that the archive file has been extracted to the deployment path above.  To continue choose one of these options:

<ol>
                    <li>Skip the extraction process by <a href="javascript:void(0)" onclick="DUPX.getManaualArchiveOpt()">[enabling manual archive extraction]</a> </li>
                    <li>Ignore this message and continue with the install process to re-extract the archive file.</li>
                </ol>

<small>Note: This test looks for a file named <i>dup-wp-config-arc__[HASH].txt</i> in the dup-installer directory.  If the file exists then this notice is shown.
                    The <i>dup-wp-config-arc__[HASH].txt</i> file is created with every archive and removed once the install is complete.  For more details on this process see the
                    <a href="https://snapcreek.com/duplicator/docs/faqs-tech/#faq-installer-015-q" target="_blank">manual extraction FAQ</a>.</small>
            </div>
        <?php endif; ?>

<?php if ($is_dbonly && !$is_wordpress) : ?>
            <div class="status fail">Warn</div>
            <div class="title" data-type="toggle" data-target="#s1-notice25"><i class="fa fa-caret-right"></i> Database Only</div>
            <div class="info" id="s1-notice25">
                <b>Deployment Path:</b> <i><?php echo "{$GLOBALS['DUPX_ROOT']}"; ?></i>
                <br/><br/>

The installer has detected that a WordPress site does not exist at the deployment path above. This installer is currently in 'Database Only' mode because that is
                how the archive was created.  If core WordPress site files do not exist at the path above then they will need to be placed there in order for a WordPress site
                to properly work.  To continue choose one of these options:

<ol>
                    <li>Place this installer and archive at a path where core WordPress files already exist to hide this message. </li>
                    <li>Create a new package that includes both the database and the core WordPress files.</li>
                    <li>Ignore this message and install only the database (for advanced users only).</li>
                </ol>

<small>Note: This test simply looks for the directories <?php echo DUPX_Server::$wpCoreDirsList; ?> and a wp-config.php file.  If they are not found in the
                    deployment path above then this notice is shown.</small>

</div>
        <?php endif; ?>

<div class="status <?php echo ($notice['30'] == 'Good') ? 'pass' : 'fail' ?>"><?php echo DUPX_U::esc_html($notice['30']); ?></div>
        <div class="title" data-type="toggle" data-target="#s1-notice30"><i class="fa fa-caret-right"></i> Package Age</div>
        <div class="info" id="s1-notice30">
            This package is <?php echo "{$fulldays}"; ?> day(s) old. Packages older than 180 days might be considered stale.  It is recommended to build a new
            package unless your aware of the content and its data.  This is message is simply a recommendation.
        </div>

<div class="status <?php echo ($notice['45'] == 'Good') ? 'pass' : 'fail' ?>"><?php echo $notice['45']; ?></div>
        <div class="title" data-type="toggle" data-target="#s1-notice45"><i class="fa fa-caret-right"></i> PHP Version Mismatch</div>
        <div class="info" id="s1-notice45">
            <?php
            $cssStyle   = $notice['45'] == 'Good' ? 'color:green' : 'color:red';
            echo "<b style='{$cssStyle}'>You are migrating site from the PHP {$packagePHP} to the PHP {$currentPHP}</b>.<br/>"
            ."If this servers PHP version is different from the PHP version of where the package was created it might cause problems with various parts of your website
                    and/or plugins and themes.   It is highly recommended to try and use the same version of PHP if you are able to do so.  This is simply a warning
                    and in the event no problems arise then you can igonre this message.<br/>";
            ?>
        </div>

<div class="status <?php echo ($notice['50'] == 'Good') ? 'pass' : 'fail' ?>"><?php echo DUPX_U::esc_html($notice['50']); ?></div>
        <div class="title" data-type="toggle" data-target="#s1-notice50"><i class="fa fa-caret-right"></i> PHP Open Base</div>
        <div class="info" id="s1-notice50">
            <b>Open BaseDir:</b> <i><?php echo $notice['50'] == 'Good' ? "<i class='dupx-pass'>Disabled</i>" : "<i class='dupx-fail'>Enabled</i>"; ?></i>
            <br/><br/>

If <a href="http://php.net/manual/en/ini.core.php#ini.open-basedir" target="_blank">open_basedir</a> is enabled and your
            having issues getting your site to install properly; please work with your host and follow these steps to prevent issues:
            <ol style="margin:7px; line-height:19px">
                <li>Disable the open_basedir setting in the php.ini file</li>
                <li>If the host will not disable, then add the path below to the open_basedir setting in the php.ini<br/>
                    <i style="color:maroon">"<?php echo str_replace('\\', '/', dirname(__FILE__)); ?>"</i>
                </li>
                <li>Save the settings and restart the web server</li>
            </ol>
            Note: This warning will still show if you choose option #2 and open_basedir is enabled, but should allow the installer to run properly.  Please work with your
            hosting provider or server administrator to set this up correctly.
        </div>

<div class="status <?php echo ($notice['60'] == 'Good') ? 'pass' : 'fail' ?>"><?php echo DUPX_U::esc_html($notice['60']); ?></div>
        <div class="title" data-type="toggle" data-target="#s1-notice60"><i class="fa fa-caret-right"></i> PHP Timeout</div>
        <div class="info" id="s1-notice60">
            <b>Archive Size:</b> <?php echo DUPX_U::readableByteSize($arcSize) ?>  <small>(detection limit is set at <?php echo DUPX_U::readableByteSize($max_time_size) ?>) </small><br/>
            <b>PHP max_execution_time:</b> <?php echo "{$max_time_ini}"; ?> <small>(zero means not limit)</small> <br/>
            <b>PHP set_time_limit:</b> <?php echo ($max_time_zero) ? '<i style="color:green">Success</i>' : '<i style="color:maroon">Failed</i>' ?>
            <br/><br/>

The PHP <a href="http://php.net/manual/en/info.configuration.php#ini.max-execution-time" target="_blank">max_execution_time</a> setting is used to
            determine how long a PHP process is allowed to run.  If the setting is too small and the archive file size is too large then PHP may not have enough
            time to finish running before the process is killed causing a timeout.
            <br/><br/>

Duplicator attempts to turn off the timeout by using the
            <a href="http://php.net/manual/en/function.set-time-limit.php" target="_blank">set_time_limit</a> setting.   If this notice shows as a warning then it is
            still safe to continue with the install.  However, if a timeout occurs then you will need to consider working with the max_execution_time setting or extracting the
            archive file using the 'Manual Archive Extraction' method.
            Please see the	<a href="https://snapcreek.com/duplicator/docs/faqs-tech/#faq-trouble-100-q" target="_blank">FAQ timeout</a> help link for more details.
        </div>

<div class="status <?php echo ($notice['70'] == 'Good') ? 'pass' : 'fail' ?>"><?php echo DUPX_U::esc_html($notice['70']); ?></div>
        <div class="title" data-type="toggle" data-target="#s1-notice70"><i class="fa fa-caret-right"></i> WordPress Multisite</div>
        <div class="info" id="s1-notice70">
            <b>Status:</b> <?php echo $notice['70'] == 'Good' ? 'This archive is not a Multisite' : 'This is an unsupported Multisite archive'; ?>
            <br/><br/>

Duplicator does not support WordPress Multisite (MU) migrations.  We recommend using Duplicator Pro which currently supports full Multisite migrations and
            subsite to  standalone site migrations.
            <br/><br/>
            While it is not recommended you can still continue with the build of this package.  Please note that after the install the site may not be working correctly.
            Additional manual custom configurations will need to be made to finalize this Multisite migration.

<i><a href='https://snapcreek.com/duplicator/?utm_source=duplicator_free&utm_medium=wordpress_plugin&utm_content=free_is_mu_warn_exe&utm_campaign=duplicator_pro' target='_blank'>[upgrade to pro]</a></i>
        </div>

<div class="status <?php echo ($notice['80'] == 'Good') ? 'pass' : 'fail' ?>"><?php echo DUPX_U::esc_html($notice['80']); ?></div>
        <div class="title" data-type="toggle" data-target="#s1-notice80"><i class="fa fa-caret-right"></i> WordPress wp-config Location</div>
        <div class="info" id="s1-notice80">
            If the wp-config.php file was moved up one level and out of the WordPress root folder in the package creation site then this test will show a warning.
            <br/><br/>
            This Duplicator installer will place this wp-config.php file in the WordPress setup root folder of this installation site to help stabilize the install process.
            This process will not break anything in your installation site, but the details are here for your information.
        </div>

<div class="status <?php echo ($notice['90'] == 'Good') ? 'pass' : 'fail' ?>"><?php echo DUPX_U::esc_html($notice['90']); ?></div>
        <div class="title" data-type="toggle" data-target="#s1-notice90"><i class="fa fa-caret-right"></i> WordPress wp-content Location</div>
        <div class="info" id="s1-notice90">
            If the wp-content directory was moved and not located at the WordPress root folder in the package creation site then this test will show a warning.
            <br/><br/>
            Duplicator Installer will place this wp-content directory in the WordPress setup root folder of this installation site. It will not break anything in your installation
            site. It is just for your information.
        </div>

<div class="status <?php echo ($notice['100'] == 'Good') ? 'pass' : 'fail' ?>"><?php echo DUPX_U::esc_html($notice['100']); ?></div>
        <div class="title" data-type="toggle" data-target="#s1-notice100"><i class="fa fa-caret-right"></i> Sufficient Disk Space</div>
        <div class="info" id="s1-notice100">
            <?php
            echo ($notice['100'] == 'Good') ? 'You have sufficient disk space in your machine to extract the archive.' : 'You don’t have sufficient disk space in your machine to extract the archive. Ask your host to increase disk space.'
            ?>
        </div>

<div class="status <?php echo ($notice['110'] == 'Good') ? 'pass' : 'fail' ?>"><?php echo DUPX_U::esc_html($notice['110']); ?></div>
        <div class="title" data-type="toggle" data-target="#s1-notice110"><i class="fa fa-caret-right"></i> Wordfence</div>
        <div class="info" id="s1-notice110">
            <b>Wordfence Firewall:</b> <?php echo ($notice['110'] == 'Warn') ? "<span style='color:red;'>detected at {$parentWordFencePath}</span>" : "<span style='color:green;'>not detected</span>"; ?>
            <p>
                The Wordfence Web Application Firewall is a PHP based, application level firewall that filters out malicious
                requests to your site. Sometimes Wordfence returns false positives on requests done during the installation process,
                because of which it might fail. We recommend turning off the Wordfence firewall of the WordPress instance located at the mentioned path.
            </p>
        </div>

</div>

</div>
<br/><br/>

<?php if ($req_success && $arcCheck != 'Fail') : ?>
<div id="s1-warning-check">
    <?php if ($is_overwrite_mode && $is_wordpress) { ?>
        <input id="accept-overwrite" name="accept-overwrite" type="checkbox" onclick="DUPX.acceptWarning()" />
        <label for="accept-overwrite">Continue with site overwrite mode*</label><br/>
    <?php } ?>
    <input id="accept-warnings" name="accpet-warnings" type="checkbox" onclick="DUPX.acceptWarning()" />
    <label for="accept-warnings">I have read and accept all <a href="javascript:void(0)" onclick="DUPX.viewTerms()">terms &amp; notices</a>*<br/>
        <small style="font-style:italic">* required to continue</small>
    </label><br/>
</div>
<?php include ('view.s1.terms.php'); ?>
<br/><br/>
<br/><br/>
<?php endif; ?>

<?php if (!$req_success || $arcCheck == 'Fail') : ?>
    <div class="s1-err-msg">
        <i>
            This installation will not be able to proceed until the setup and validation sections above both pass. Please adjust your servers settings or contact your
            server administrator, hosting provider or visit the resources below for additional help.
        </i>
        <div style="padding:10px">
            &raquo; <a href="https://snapcreek.com/duplicator/docs/faqs-tech/" target="_blank">Technical FAQs</a> <br/>
            &raquo; <a href="https://snapcreek.com/support/docs/" target="_blank">Online Documentation</a> <br/>
        </div>
    </div>
<?php else : ?>
    <div class="footer-buttons">
        <button id="s1-deploy-btn" type="button" title="<?php echo DUPX_U::esc_attr($agree_msg); ?>" onclick="DUPX.processNext()"  class="default-btn"> Next <i class="fa fa-caret-right"></i> </button>
    </div>
<?php endif; ?>

</form>

<form id="s1-dbtest-form" method="post" target="_blank" autocomplete="off">
    <input type="hidden" name="dbonlytest" value="1" />
    <input type="hidden" name="view" value="step2" />
    <input type="hidden" name="csrf_token" value="<?php echo DUPX_CSRF::generate('step2'); ?>">
    <input type="hidden" name="secure-pass" value="<?php echo DUPX_U::esc_attr($_POST['secure-pass']); ?>" />
    <input type="hidden" name="secure-archive" value="<?php echo DUPX_U::esc_attr($_POST['secure-archive']); ?>" />
</form>

<form id='s1-result-form' method="post" class="content-form" style="display:none" autocomplete="off">

<div class="dupx-logfile-link"><?php DUPX_View_Funcs::installerLogLink(); ?></div>
    <div class="hdr-main">
        Step <span class="step">1</span> of 4: Deployment
        <div class="sub-header">This step will extract the archive file contents.</div>
    </div>

<div class="dupx-debug">
        <i>Step 1 - AJAX Response</i>
        <input type="hidden" name="view" value="step2" />
        <input type="hidden" name="csrf_token" value="<?php echo DUPX_CSRF::generate('step2'); ?>">
        <input type="hidden" name="secure-pass" value="<?php echo DUPX_U::esc_attr($_POST['secure-pass']); ?>" />
        <input type="hidden" name="secure-archive" value="<?php echo DUPX_U::esc_attr($_POST['secure-archive']); ?>" />
        <input type="hidden" name="logging" id="ajax-logging"  />
        <input type="hidden" name="config_mode" id="ajax-config-mode" />
        <input type="hidden" name="exe_safe_mode" id="exe-safe-mode"  value="0" />
        <input type="hidden" name="json" id="ajax-json" />
        <textarea id='ajax-json-debug' name='json_debug_view'></textarea>
        <input type='submit' value='manual submit'>
    </div>

<div id="progress-area">
        <div style="width:500px; margin:auto">
            <div style="font-size:1.7em; margin-bottom:20px"><i class="fas fa-circle-notch fa-spin"></i> Extracting Archive Files<span id="progress-pct"></span></div>
            <div id="progress-bar"></div>
            <h3> Please Wait...</h3><br/><br/>
            <i>Keep this window open during the extraction process.</i><br/>
            <i>This can take several minutes.</i>
        </div>
    </div>

<div id="ajaxerr-area" style="display:none">
        <p>Please try again an issue has occurred.</p>
        <div style="padding: 0px 10px 10px 0px;">
            <div id="ajaxerr-data">An unknown issue has occurred with the file and database setup process.  Please see the <?php DUPX_View_Funcs::installerLogLink(); ?> file for more details.</div>
            <div style="text-align:center; margin:10px auto 0px auto">
                <br/>
                <input type="button" class="default-btn" onclick="DUPX.hideErrorResult()" value="&laquo; Try Again" />
                <br/><br/>
                <i style='font-size:11px'>See online help for more details at <a href='https://snapcreek.com/ticket' target='_blank'>snapcreek.com</a></i>
            </div>
        </div>
    </div>
</form>

DUPX.toggleSetupType = function ()
    {
        var val = $("input:radio[name='setup_type']:checked").val();
        $('div.s1-setup-type-sub').hide();
        $('#s1-setup-type-sub-' + val).show(200);
    };

DUPX.getManaualArchiveOpt = function ()
    {
        $("html, body").animate({scrollTop: $(document).height()}, 1500);
        $("div[data-target='#s1-area-adv-opts']").find('i.fa').removeClass('fa-plus-square').addClass('fa-minus-square');
        $('#s1-area-adv-opts').show(1000);
        $('select#archive_engine').val('manual').focus();
    };

DUPX.startExtraction = function ()
    {
        var isManualExtraction = ($("#archive_engine").val() == "manual");
        var zipEnabled = <?php echo DupLiteSnapLibStringU::boolToString($archive_config->isZipArchive()); ?>;

$("#operation-text").text("Extracting Archive Files");

if (zipEnabled || isManualExtraction) {
            DUPX.runStandardExtraction();
        } else {
            DUPX.kickOffDupArchiveExtract();
        }
    }

DUPX.processNext = function ()
    {
        DUPX.startExtraction();
    };

DUPX.updateProgressPercent = function (percent)
    {
        var percentString = '';
        if (percent > 0) {
            percentString = ' ' + percent + '%';
        }
        $("#progress-pct").text(percentString);
    };

DUPX.clearDupArchiveStatusTimer = function ()
    {
        if (DUPX.dupArchiveStatusIntervalID != -1) {
            clearInterval(DUPX.dupArchiveStatusIntervalID);
            DUPX.dupArchiveStatusIntervalID = -1;
        }
    };

DUPX.getCriticalFailureText = function (failures)
    {
        var retVal = null;

if ((failures !== null) && (typeof failures !== 'undefined')) {
            var len = failures.length;

for (var j = 0; j < len; j++) {
                failure = failures[j];

if (failure.isCritical) {
                    retVal = failure.description;
                    break;
                }
            }
        }

return retVal;
    };

DUPX.DAWSProcessingFailed = function (errorText)
    {
        DUPX.clearDupArchiveStatusTimer();
        $('#ajaxerr-data').html(errorText);
        DUPX.hideProgressBar();
    }

DUPX.handleDAWSProcessingProblem = function (errorText, pingDAWS) {

DUPX.DAWS.FailureCount++;

if (DUPX.DAWS.FailureCount <= DUPX.DAWS.MaxRetries) {
            var callback = DUPX.pingDAWS;

DUPX.throttleDelay = 9;	// Equivalent of 'low' server throttling
            console.log('Relaunching in ' + DUPX.DAWS.RetryDelayInMs);
            setTimeout(callback, DUPX.DAWS.RetryDelayInMs);
        } else {
            console.log('Too many failures.');
            DUPX.DAWSProcessingFailed(errorText);
        }
    };

DUPX.handleDAWSCommunicationProblem = function (xHr, pingDAWS, textStatus, page)
    {
        DUPX.DAWS.FailureCount++;

if (DUPX.DAWS.FailureCount <= DUPX.DAWS.MaxRetries) {

var callback = DUPX.pingDAWS;

if (pingDAWS) {
                console.log('!!!PING FAILURE #' + DUPX.DAWS.FailureCount);
            } else {
                console.log('!!!KICKOFF FAILURE #' + DUPX.DAWS.FailureCount);
                callback = DUPX.kickOffDupArchiveExtract;
            }
            console.log(xHr);
            DUPX.throttleDelay = 9;	// Equivalent of 'low' server throttling
            console.log('Relaunching in ' + DUPX.DAWS.RetryDelayInMs);
            setTimeout(callback, DUPX.DAWS.RetryDelayInMs);
        } else {
            console.log('Too many failures.');
            DUPX.ajaxCommunicationFailed(xHr, textStatus, page);
        }
    };

// Will either query for status or push it to continue the extraction
    DUPX.pingDAWS = function ()
    {
        console.log('pingDAWS:start');
        var request = new Object();
        var isClientSideKickoff = DUPX.isClientSideKickoff();

if (isClientSideKickoff) {
            console.log('pingDAWS:client side kickoff');
            request.action = "expand";
            request.client_driven = 1;
            request.throttle_delay = DUPX.throttleDelay;
            request.worker_time = DUPX.DAWS.PingWorkerTimeInSec;
        } else {
            console.log('pingDAWS:not client side kickoff');
            request.action = "get_status";
        }

console.log("pingDAWS:action=" + request.action);

$.ajax({
            type: "POST",
            timeout: DUPX.DAWS.PingWorkerTimeInSec * 2000, // Double worker time and convert to ms
            url: DUPX.DAWS.Url,
            data: JSON.stringify(request),
            success: function (respData, textStatus, xHr) {
                try {
                    var data = DUPX.parseJSON(respData);
                } catch (err) {
                    console.error(err);
                    console.error('JSON parse failed for response data: ' + respData);
                    console.log('AJAX error. textStatus=');
                    console.log(textStatus);
                    DUPX.handleDAWSCommunicationProblem(xHr, true, textStatus, 'ping');
                    return false;
                }

DUPX.DAWS.FailureCount = 0;
                console.log("pingDAWS:AJAX success. Resetting failure count");

// DATA FIELDS
                // archive_offset, archive_size, failures, file_index, is_done, timestamp

if (typeof (data) != 'undefined' && data.pass == 1) {

console.log("pingDAWS:Passed");

var status = data.status;
                    var percent = Math.round((status.archive_offset * 100.0) / status.archive_size);

console.log("pingDAWS:updating progress percent");
                    DUPX.updateProgressPercent(percent);

var criticalFailureText = DUPX.getCriticalFailureText(status.failures);

if (status.failures.length > 0) {
                        console.log("pingDAWS:There are failures present. (" + status.failures.length) + ")";
                    }

if (criticalFailureText === null) {
                        console.log("pingDAWS:No critical failures");
                        if (status.is_done) {

console.log("pingDAWS:archive has completed");
                            if (status.failures.length > 0) {

console.log(status.failures);
                                var errorMessage = "pingDAWS:Problems during extract. These may be non-critical so continue with install.\n------\n";
                                var len = status.failures.length;

for (var j = 0; j < len; j++) {
                                    failure = status.failures[j];
                                    errorMessage += failure.subject + ":" + failure.description + "\n";
                                }

alert(errorMessage);
                            }

DUPX.clearDupArchiveStatusTimer();
                            console.log("pingDAWS:calling finalizeDupArchiveExtraction");
                            DUPX.finalizeDupArchiveExtraction(status);
                            console.log("pingDAWS:after finalizeDupArchiveExtraction");

var dataJSON = JSON.stringify(data);

// Don't stop for non-critical failures - just display those at the end

$("#ajax-logging").val($("input:radio[name=logging]:checked").val());
                            $("#ajax-config-mode").val($("#config_mode").val());
                            $("#ajax-json").val(escape(dataJSON));

$("#ajax-json-debug").val(dataJSON);
                        } else if (isClientSideKickoff) {
                            console.log('pingDAWS:Archive not completed so continue ping DAWS in 500');
                            setTimeout(DUPX.pingDAWS, 500);
                        }
                    } else {
                        console.log("pingDAWS:critical failures present");
                        // If we get a critical failure it means it's something we can't recover from so no purpose in retrying, just fail immediately.
                        var errorString = 'Error Processing Step 1<br/>';

errorString += criticalFailureText;

DUPX.DAWSProcessingFailed(errorString);
                    }
                } else {
                    var errorString = 'Error Processing Step 1<br/>';
                    errorString += data.error;

DUPX.handleDAWSProcessingProblem(errorString, true);
                }
            },
            error: function (xHr, textStatus) {
                console.log('AJAX error. textStatus=');
                console.log(textStatus);
                DUPX.handleDAWSCommunicationProblem(xHr, true, textStatus, 'ping');
            }
        });
    };

DUPX.isClientSideKickoff = function ()
    {
        return $('#clientside_kickoff').is(':checked');
    }

DUPX.areConfigFilesPreserved = function ()
    {
        return $('#config_mode').is(':checked');
    }

DUPX.kickOffDupArchiveExtract = function ()
    {
        console.log('kickOffDupArchiveExtract:start');
        var $form = $('#s1-input-form');
        var request = new Object();
        var isClientSideKickoff = DUPX.isClientSideKickoff();

request.action = "start_expand";
        request.restore_directory = '<?php echo DUPX_U::esc_js($root_path); ?>';
        request.worker_time = DUPX.DAWS.KickoffWorkerTimeInSec;
        request.client_driven = isClientSideKickoff ? 1 : 0;
        request.throttle_delay = DUPX.throttleDelay;
        request.filtered_directories = ['dup-installer'];

var requestString = JSON.stringify(request);

if (!isClientSideKickoff) {
            console.log('kickOffDupArchiveExtract:Setting timer');
            // If server is driving things we need to poll the status
            DUPX.dupArchiveStatusIntervalID = setInterval(DUPX.pingDAWS, DUPX.DAWS.StatusPeriodInMS);
        } else {
            console.log('kickOffDupArchiveExtract:client side kickoff');
        }

console.log("daws url=" + DUPX.DAWS.Url);
        console.log("requeststring=" + requestString);

$.ajax({
            type: "POST",
            timeout: DUPX.DAWS.KickoffWorkerTimeInSec * 2000, // Double worker time and convert to ms
            url: DUPX.DAWS.Url + '&daws_action=start_expand',
            data: requestString,
            beforeSend: function () {
                DUPX.showProgressBar();
                $form.hide();
                $('#s1-result-form').show();
                DUPX.updateProgressPercent(0);
            },
            success: function (respData, textStatus, xHr) {
                try {
                    var data = DUPX.parseJSON(respData);
                } catch (err) {
                    console.error(err);
                    console.error('JSON parse failed for response data: ' + respData);
                    console.log('kickOffDupArchiveExtract:AJAX error. textStatus=', textStatus);
                    DUPX.handleDAWSCommunicationProblem(xHr, false, textStatus);
                    return false;
                }
                console.log('kickOffDupArchiveExtract:success');
                if (typeof (data) != 'undefined' && data.pass == 1) {

var criticalFailureText = DUPX.getCriticalFailureText(status.failures);

if (criticalFailureText === null) {

var dataJSON = JSON.stringify(data);

//RSR TODO:Need to check only for FATAL errors right now - have similar failure check as in pingdaws
                        DUPX.DAWS.FailureCount = 0;
                        console.log("kickOffDupArchiveExtract:Resetting failure count");

$("#ajax-json-debug").val(dataJSON);
                        if (typeof (data) != 'undefined' && data.pass == 1) {

if (isClientSideKickoff) {
                                console.log('kickOffDupArchiveExtract:Initial ping DAWS in 500');
                                setTimeout(DUPX.pingDAWS, 500);
                            }

} else {
                            $('#ajaxerr-data').html('Error Processing Step 1');
                            DUPX.hideProgressBar();
                        }
                    } else {
                        // If we get a critical failure it means it's something we can't recover from so no purpose in retrying, just fail immediately.
                        var errorString = 'kickOffDupArchiveExtract:Error Processing Step 1<br/>';
                        errorString += criticalFailureText;
                        DUPX.DAWSProcessingFailed(errorString);
                    }
                } else {
                    if ('undefined' !== typeof data.isWPAlreadyExistsError
                            && data.isWPAlreadyExistsError) {
                        DUPX.DAWSProcessingFailed(data.error);
                    } else {
                        var errorString = 'kickOffDupArchiveExtract:Error Processing Step 1<br/>';
                        errorString += data.error;
                        DUPX.handleDAWSProcessingProblem(errorString, false);
                    }
                }
            },
            error: function (xHr, textStatus) {

console.log('kickOffDupArchiveExtract:AJAX error. textStatus=', textStatus);
                DUPX.handleDAWSCommunicationProblem(xHr, false, textStatus);
            }
        });
    };

DUPX.finalizeDupArchiveExtraction = function (dawsStatus)
    {
        console.log("finalizeDupArchiveExtraction:start");
        var $form = $('#s1-input-form');
        $("#s1-input-form-extra-data").val(JSON.stringify(dawsStatus));
        console.log("finalizeDupArchiveExtraction:after stringify dawsstatus");
        var formData = $form.serialize();

$.ajax({
            type: "POST",
            timeout: 30000,
            url: window.location.href,
            data: formData,
            success: function (respData, textStatus, xHr) {
                try {
                    var data = DUPX.parseJSON(respData);
                } catch (err) {
                    console.error(err);
                    console.error('JSON parse failed for response data: ' + respData);
                    console.log("finalizeDupArchiveExtraction:error");
                    console.log(xHr.statusText);
                    console.log(xHr.getAllResponseHeaders());
                    console.log(xHr.responseText);
                    return false;
                }
                console.log("finalizeDupArchiveExtraction:success");
            },
            error: function (xHr) {
                console.log("finalizeDupArchiveExtraction:error");
                console.log(xHr.statusText);
                console.log(xHr.getAllResponseHeaders());
                console.log(xHr.responseText);
            }
        });
    };

/**
     * Performs Ajax post to either do a zip or manual extract and then create db
     */
    DUPX.runStandardExtraction = function ()
    {
        var $form = $('#s1-input-form');

//3600000 = 60 minutes
        //If the extraction takes longer than 30 minutes then user
        //will probably want to do a manual extraction or even FTP
        $.ajax({
            type: "POST",
            timeout: 3600000,
            cache: false,
            url: window.location.href,
            data: $form.serialize(),
            beforeSend: function () {
                DUPX.showProgressBar();
                $form.hide();
                $('#s1-result-form').show();
            },
            success: function (data, textStatus, xHr) {
                $("#ajax-json-debug").val(data);
                var dataJSON = data;
                data = DUPX.parseJSON(data, xHr, textStatus);
                if (false === data) {
                    return;
                }
                $("#ajax-json-debug").val(dataJSON);
                if (typeof (data) != 'undefined' && data.pass == 1) {
                    $("#ajax-logging").val($("input:radio[name=logging]:checked").val());
                    $("#ajax-config-mode").val($("#config_mode").val());
                    $("#ajax-json").val(escape(dataJSON));

<?php if (!DUPX_Log::isLevel(DUPX_Log::LV_DEBUG)) : ?>
                        setTimeout(function () {
                            $('#s1-result-form').submit();
                        }, 500);
<?php endif; ?>
                   // $('#progress-area').fadeOut(1000);
                } else {
                    $('#ajaxerr-data').html('Error Processing Step 1');
                    DUPX.hideProgressBar();
                }
            },
            error: function (xHr) {
                DUPX.ajaxCommunicationFailed(xHr, '', 'extract');
            }
        });
    };

DUPX.ajaxCommunicationFailed = function (xhr, textStatus, page)
    {
        var status = "<b>Server Code:</b> " + xhr.status + "<br/>";
        status += "<b>Status:</b> " + xhr.statusText + "<br/>";
        status += "<b>Response:</b> " + xhr.responseText + "<hr/>";

if (textStatus && textStatus.toLowerCase() == "timeout" || textStatus.toLowerCase() == "service unavailable") {

var default_timeout_message = "<b>Recommendation:</b><br/>";
            default_timeout_message += "See <a target='_blank' href='https://snapcreek.com/duplicator/docs/faqs-tech/?180116102141#faq-trouble-100-q'>this FAQ item</a> for possible resolutions.";
            default_timeout_message += "<hr>";
            default_timeout_message += "<b>Additional Resources...</b><br/>";
            default_timeout_message += "With thousands of different permutations it's difficult to try and debug/diagnose a server. If you're running into timeout issues and need help we suggest you follow these steps:<br/><br/>";
            default_timeout_message += "<ol>";
            default_timeout_message += "<li><strong>Contact Host:</strong> Tell your host that you're running into PHP/Web Server timeout issues and ask them if they have any recommendations</li>";
            default_timeout_message += "<li><strong>Dedicated Help:</strong> If you're in a time-crunch we suggest that you contact <a target='_blank' href='https://snapcreek.com/duplicator/docs/faqs-tech/?180116150030#faq-resource-030-q'>professional server administrator</a>. A dedicated resource like this will be able to work with you around the clock to the solve the issue much faster than we can in most cases.</li>";
            default_timeout_message += "<li><strong>Consider Upgrading:</strong> If you're on a budget host then you may run into constraints. If you're running a larger or more complex site it might be worth upgrading to a <a target='_blank' href='https://snapcreek.com/duplicator/docs/faqs-tech/?180116150030#faq-resource-040-q'>managed VPS server</a>. These systems will pretty much give you full control to use the software without constraints and come with excellent support from the hosting company.</li>";
            default_timeout_message += "<li><strong>Contact SnapCreek:</strong> We will try our best to help configure and point users in the right direction, however these types of issues can be time-consuming and can take time from our support staff.</li>";
            default_timeout_message += "</ol>";

if (page) {
                switch (page) {
                    default:
                        status += default_timeout_message;
                        break;
                    case 'extract':
                        status += "<b>Recommendation:</b><br/>";
                        status += "See <a target='_blank' href='https://snapcreek.com/duplicator/docs/faqs-tech/#faq-installer-015-q'>this FAQ item</a> for possible resolutions.<br/><br/>";
                        break;
                    case 'ping':
                        status += "<b>Recommendation:</b><br/>";
                        status += "See <a target='_blank' href='https://snapcreek.com/duplicator/docs/faqs-tech/?180116152758#faq-trouble-030-q'>this FAQ item</a> for possible resolutions.<br/><br/>";
                        break;
                    case 'delete-site':
                        status += "<b>Recommendation:</b><br/>";
                        status += "See <a target='_blank' href='https://snapcreek.com/duplicator/docs/faqs-tech/?180116153643#faq-installer-120-q'>this FAQ item</a> for possible resolutions.<br/><br/>";
                        break;
                }
            } else {
                status += default_timeout_message;
            }

} else if ((xhr.status == 403) || (xhr.status == 500)) {
            status += "<b>Recommendation:</b><br/>";
            status += "See <a target='_blank' href='https://snapcreek.com/duplicator/docs/faqs-tech/#faq-installer-120-q'>this FAQ item</a> for possible resolutions.<br/><br/>"
        } else if ((xhr.status == 0) || (xhr.status == 200)) {
            status += "<b>Recommendation:</b><br/>";
            status += "Possible server timeout! Performing a 'Manual Extraction' can avoid timeouts.";
            status += "See <a target='_blank' href='https://snapcreek.com/duplicator/docs/faqs-tech/#faq-installer-015-q'>this FAQ item</a> for a complete overview.<br/><br/>"
        } else {
            status += "<b>Additional Resources:</b><br/> ";
            status += "&raquo; <a target='_blank' href='https://snapcreek.com/duplicator/docs/'>Help Resources</a><br/>";
            status += "&raquo; <a target='_blank' href='https://snapcreek.com/duplicator/docs/faqs-tech/'>Technical FAQ</a>";
        }

$('#ajaxerr-data').html(status);
        DUPX.hideProgressBar();
    };

DUPX.parseJSON = function (mixData, xHr, textStatus) {
        try {
            var parsed = JSON.parse(mixData);
            return parsed;
        } catch (e) {
            console.log("JSON parse failed - 1");
        }

/** Go back on AJAX result view */
    DUPX.hideErrorResult = function ()
    {
        $('#s1-result-form').hide();
        $('#s1-input-form').show(200);
    }

/** Config Mode Changes */
    DUPX.toggleConfigMode = function(select)
    {
        var $notes  = $('.config-files-helper');
        var $data   = $(select).find('option:selected').attr('data-title');
        $notes.html($data).hide();
        $notes.html($data).show(400);
    }

/**
     * Accetps Usage Warning */
    DUPX.acceptWarning = function ()
    {
        if ($('#s1-warning-check :checkbox').not(':checked').length === 0) {
            $("#s1-deploy-btn").removeAttr("disabled");
            $("#s1-deploy-btn").removeAttr("title");
        } else {
            $("#s1-deploy-btn").attr("disabled", "true");
            $("#s1-deploy-btn").attr("title", "<?php echo DUPX_U::esc_js($agree_msg); ?>");
        }
    };

DUPX.onSafeModeSwitch = function ()
    {
        var mode = $('#exe_safe_mode').val();
        if (mode == 0) {
            $("#config_mode").removeAttr("disabled");
        } else if (mode == 1 || mode == 2) {
            $("#config_mode").val("NEW");
            $("#config_mode").attr("disabled", true);
            $('#config_mode option:eq(0)').prop('selected', true)
        }

$('#exe-safe-mode').val(mode);
    };

//DOCUMENT LOAD
    $(document).ready(function () {
        DUPX.DAWS = new Object();
        DUPX.DAWS.Url = window.location.href + '?is_daws=1&daws_csrf_token=<?php echo urlencode(DUPX_CSRF::generate('daws')); ?>';
        DUPX.DAWS.StatusPeriodInMS = 5000;
        DUPX.DAWS.PingWorkerTimeInSec = 9;
        DUPX.DAWS.KickoffWorkerTimeInSec = 6; // Want the initial progress % to come back quicker

DUPX.DAWS.MaxRetries = 10;
        DUPX.DAWS.RetryDelayInMs = 8000;

DUPX.dupArchiveStatusIntervalID = -1;
        DUPX.DAWS.FailureCount = 0;
        DUPX.throttleDelay = 0;

//INIT Routines
        DUPX.initToggle();
        $("#tabs").tabs();
        $("#tabs-opts").tabs();
        DUPX.acceptWarning();

$('#archive_action_wrapper').each(function () {
            let paramWrapper = $(this);
            let noteWrapper = paramWrapper.find('.sub-note');

paramWrapper.find('.input-item').change(function () {
                noteWrapper.find('.archive-action-note').hide();
                noteWrapper.find('.archive-action-' + $(this).val()).show(500);
            });
        });
<?php
$isWindows = DUPX_U::isWindows();
if (!$isWindows) {
    ?>
            $('#set_file_perms').trigger("click");
            $('#set_dir_perms').trigger("click");
    <?php
}
?>
        DUPX.toggleSetupType();

<?php echo (!$all_success) ? "$('#s1-area-sys-setup-link').trigger('click');" : ""; ?>
    });
</script>

📁 Sid Gifari File Manager